General Tools 444 Depth/Angle Gauge

The #444 Depth/Angle Gauge precisely measures the depth of small holes and slots. It also works as a protractor to facilitate setting an angle to 30°, 45° or 60° on either side.

• Etched stainless steel rule and hardened steel base
• Spring tension nut simplfies operation by securing graduated stainless steel rule in milled slot at 90° angle to base

• Rule graduations: Every 32nd and 64th of an inch
• Rule dimensions: 6 x 1/4 in.
• Base width: 2-1/2 in.