Teslong CAMD8RL5 Rotating Dual-Lens Flexible Inspection Camera Probe, 0.33 inches (8.5 mm), 16 ft Length

Features:

• Improved with Slimmer Diameter!
• Fixed, Rotating Dual-Lens Camera - 8.5 mm Diameter
• Compatible with NTS300*/430/500*/600/700 and WF200 Teslong monitors
• IP67 Waterproof - Use in Water Up to 3.3 ft (1-meter) Deep
• LED Ring Lights are Adjustable for Brightness
• Certain NTS300 & NTS500 monitors require firmware upgrades

Camera probe only: This camera probe must be used with one of the following monitors: NTS300*, NTS430, NTS500*, NTS600, or NTS700. (*NTS300 & NTS500 may require firmware update.)

Dual lens: This probe is a dual-lens camera probe with a motorized 360° rotating feature. The probe is 0.33 inches (8.5 mm) in diameter and features a flexible metal cable housing with durable rubber coating that holds its shape well. This is a great tool for auto maintenance, home inspection, electrical installs, HVAC fixes, and household DIY.

This is to purchase the camera probe ONLY. To use this probe it must be paired with a compatible monitor, as mentioned above.

Rotating dual lens

The straight-viewing and side-viewing camera rotate with a press of a button! There are two control buttons on the base of the probe. Pressing one button rotates the side-lens clockwise, while the other button rotates it counter-clockwise. Switching between the cameras is also easy to do with the press of a button, plus you get split-screen viewing mode. Split-screen mode enables you to see the views from the forward cam and the sideways cam at the same time.

It's easy to get disoriented when you are performing an inspection. The probe cable twists and turns and then all of a sudden the camera view is upside down. This probe solves that problem. Just press the rotation button and make your view upright again!

Straight-viewing Camera:

• 1.0 megapixel HD
• 0.59 to 3.15 inch focus
• 8 Adjustable high-intensity LEDs

Side-viewing Camera:

• 1.0 megapixel HD
• 0.59 to 3.15 inch focus
• 1 Adjustable high-intensity LED

IP67 waterproof: The camera probe uses an aerospace connector that is water safe and IP67-rated to use in pools, plumbing, and rain. Use it in water up to 1 meter (3.2 ft) deep.

Flexible Probe: With a flexible and sturdy design, the camera cable can easily bend and maintain its shape, allowing you to easily access hard-to-reach areas.