Sandvik Coromant 5922167 Milling Insert Style 490 Size 14 Grade S30T Solid Carbide Shape Square

CoroMill® 490 gives true 90-degree cuts without sharp steps. It uses four-edge inserts with light cutting action, a result of innovative insert geometry in combination with high-performance grades. Since the tool produces a smooth profile, the need for finishing is efficiently reduced.

Features

• Great flexibility, high precision and good tolerances
• Light and quiet cutting with low cutting forces
• High productivity with outstanding insert geometry and new grades
• Sharp edge lines and burr-free, smooth profiles
• Component feature finished in one pass
• True 90-degree cut without sharp steps
• Light cutting performance provides an optimal utilization of low-powered machine tools. This also facilitates use of the cutter on extended tool assemblies
• Undersized shanks for larger diameter cutters, using 8 mm (0.315 inch) inserts, enable these cutters to fit into smaller tool holders
• Oversized versions enhance the accessibility and provide natural clearance to tight fixtures
• Square shoulder milling
• Repeated shouldering
• Circular interpolation
• Face milling
• Insert size 08
• Max cutting depth: 5.5 mm (0.216 inch)
• Recommended cutting depth: 4 mm (0.157 inch)
• Insert size 14
• Max cutting depth: 10 mm (0.394 inch)
• Recommended cutting depth: 7 mm (0.276 inch)
• End mill and square shoulder face mill: 20-84 mm (0.75-3 inch)
• Square shoulder face mill: 20-250 mm (0.75-10 inch)
• Three different pitches: L, M, and H
• Cemented carbide, ceramic, and cubic boron nitride (CBN) inserts available
• Cylindrical, Weldon, Coromant Capto®, modular system Coromant EH, HSK, and Arbor mounting available
• Insert chip breaker geometries L, M, and H available
• Insert radius is 0.4-2.0 mm (0.016-0.079 inch)