Sandvik Coromant 5888485 Milling Insert Style 490 Size 08 Grade 1040 Solid Carbide Shape Square

CoroMill® 490 gives true 90-degree cuts without sharp steps. It uses four-edge inserts with light cutting action, a result of innovative insert geometry in combination with high-performance grades. Since the tool produces a smooth profile, the need for finishing is efficiently reduced.Benefits:Great flexibility, high precision and good tolerancesLight and quiet cutting with low cutting forcesHigh productivity with outstanding insert geometry and new gradesSharp edge lines and burr-free, smooth profilesComponent feature finished in one passTrue 90-degree cut without sharp stepsFeatures:Light cutting performance provides an optimal utilization of low-powered machine tools. This also facilitates use of the cutter on extended tool assembliesUndersized shanks for larger diameter cutters, using 8 mm (0.315 inch) inserts, enable these cutters to fit into smaller tool holdersOversized versions enhance the accessibility and provide natural clearance to tight fixturesApplication:Square shoulder millingRepeated shoulderingCircular interpolationFace milling Recommendations: Insert size 08Max cutting depth: 5.5 mm (0.216 inch)Recommended cutting depth: 4 mm (0.157 inch)Insert size 14Max cutting depth: 10 mm (0.394 inch)Recommended cutting depth: 7 mm (0.276 inchProduct range:End mill and square shoulder face mill: 20-84 mm (0.75-3 inch)Square shoulder face mill: 20-250 mm (0.75-10 inch)Three different pitches: L, M, and HCemented carbide, ceramic, and cubic boron nitride (CBN) inserts availableCylindrical, Weldon, Coromant Capto®, modular system Coromant EH, HSK, and Arbor mounting availableInsert chip breaker geometries L, M, and H availableInsert radius is 0.4-2.0 mm (0.016-0.079 inch)