Kennametal 1790875 Jobber Length Drill Bit, 4.12 mm (0.1624) Dia, 130 deg, Solid Carbide, TiAlN Finish, 74.00 mm

  • Specification
  • Overview
  • Customers Also Bought
  • Your Recently Viewed Items
  • Reviews
Kennametal 1790875 Jobber Length Drill Bit, 4.12 mm (0.1624) Dia, 130 deg, Solid Carbide, TiAlN Finish, 74.00 mm
Click to zoom
Safe Checkout
Fully secured
Money back Guaranty
100% satisfaction

Overview


Features:

  • Jobber Length Drill Bit: 4.12 mm (0.1624) Dia, 130 deg, Solid Carbide
  • TiAlN Finish, 74.00 mm OAL, Right Hand Cut, Regular Spiral Flute, Straight Shank
  • TF type drill without through coolant for high metal removal rates and excellent hole quality in short chipping materials such as gray cast iron, ductile iron, and aluminum, as well as in short-hole titanium applications.
  • Material-specific SC drill with three cutting edges for higher feed rates than with two-edged drill.
  • Three spacious flutes for rapid chip evacuation.
  • Three-margin lands deliver better hole quality and straightness than two-flute drills.
  • Uncoated K10 grade helps to prevent built-up edge in drilling aluminum and high-temp alloys.
  • Composition: Uncoated, highly wear-resistant fine-grain carbide with enhanced hot hardness properties.

Application:

  • Drilling
  • Drilling: Inclined Exit
  • Flood Coolant: Drilling
  • Shank - Cylindrical Plain ≤h6
  • Helix Angle: 30°
  • Drilling Depth: 5x
  • Drilling: Cross-Hole Drilling
  • For use on KenTIP and KSEM made-to-order inserts when a sharp cutting edge is needed. Non-coated, polished carbide for drilling aluminum, titanium, and non-ferrous materials.
⚠️ Attention CA Residents: Prop 65 Warning

Reviews