General Tools S106 Six-piece Tubing Bender Set

S106 Steel Spring Tubing Bender set Easily make bends of thin wall or soft materials, such as copper and stainless steel. Slide this spring tool over your tubing while bending to eliminate crimping and collapsing of copper and other thin wall tubing. We recommend using one bender over the tube and an additional bender inside the tube to achieve the best results. The benders are made from oil hardened and tempered spring steel with a zinc-plated finish. The 6-pc set works with r 1/4, 5/16, 3/8, 7/17, 1/2, and 5/8 Inches (6, 8, 9.5, 11, 13, 16mm) outside diameter tubes

Features:

• SIMPLE & EFFECTIVE - Easily make bends of thin wall or soft materials, such as copper and stainless steel
• BEND UP TO 180 DEGREES - Make bends up to 180 degrees without crimping or collapsing the pipe
• SIZES - For tubes with the following outside diameters (OD): 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in., 5/8 in.
• DURABLE - Made from oil hardened and tempered spring steel with a zinc-plated finish
• FOR BEST RESULTS - Use one bender over the tube and an additional bender inside the tube
• For tubes with the following O.D.s: 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in., 5/8 in.

Includes:

• #100-1/4 1/4 In. Tubing Bender
• #100-5/16 5/16 In. Tubing Bender
• #100-3/8 3/8 In. Tubing Bender
• One 7/16 in. tubing bender
• #100-1/2 1/2 In. Tubing Bender
• #100-5/8 5/8 In. Tubing Bender
• Display box

WARNING: This product can expose you to chemicals including Nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.