Exair ATEX4640 Aluminum 2.800 Btu/hr ATEX Cabinet Cooler

Aluminum ATEX Cabinet Cooler is engineered and approved for use upon purged electrical enclosures found within classified areas. The areas approved are Zones 2 and 22. This ATEX Cabinet Cooler System have been tested by UL and meet the stringent ATEX requirement for this area. Cabinet Cooler system is a low cost and reliable way to cool purged electric control panels founds in these environments. Aluminum ATEX Cabinet Cooler incorporate a low pressure relief valve which close and seal when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure (dust-tight, oil-tight, splash resistant, indoor/outdoor service). This system include a water-dirt filter separator to prevent water condensate and dirt from entering your enclosure and a cold air distribution kit used to direct the air for circulation or on to hot spots. Cabinet Cooler is CE compliant. EXAIR ATEX Cabinet Cooler System is not purged and pressurized control system and should not be relied upon nor used in place of a purged and pressurized controller. This is meant for use in conjunction with a purged and pressurized control system.

Features:

• Rated for Zone 2 and 22
• Low cost, compact
• Quiet
• Install in minutes
• Maintain NEMA 4 integrity (IP66)
• Stabilize enclosure temperature and humidity
• No CFC's
• No moving parts - maintenance free
• Mount in standard electrical knockout
• Stop nuisance tripping
• Stop heat damage
• Eliminate fans and filters
• Eliminate lost production
• Stop circuit drift
• Stop dirt contamination
• Provide washdown protection

Applications

• Programmable controllers
• Line control cabinets
• Motor control centers
• Relay panels
• NC/CNC systems
• Modular control centers
• CCTV cameras
• Computer cabinets
• Laser housings
• Electronic scales