Exair 9070 1/8 NPT Reclassifying Muffler

Reclassifying Muffler is an upgrade from Sintered Bronze Muffler. Reclassifying Muffler also eliminate oil mist.

Exhaust air from cylinders and valves often contain oil mists that can contaminate the workers' breathing air, affecting their health. Per OSHA Standard 29 CFR 1910.1000, a worker's cumulative exposure to oil mist must not exceed 5mg/m3 by volume in any eight hour shift of a 40 hour work week.

The patented wrap design of the removable element separates oil from the exhausted air so virtually no oil is released into the environment. Based on an intake of 50 PPM at 100 PSIG, the Reclassifying Mufflers reclassify and reduce the exhausted oil mist to 0.015 PPM.

A reservoir where oil accumulates at the bottom can be drained by attaching a 1/4" tube. Reclassifying Muffler passes a certain volume of air with minimal back pressure restriction so it doesn't interfere with the operation of the cylinder or valve. EXAIR Silencing Muffler help to reduce work area noise produced by air exhausting from cylinders, valves and other air powered equipment.

Per OSHA Standard 1910.95 (a), worker must not be exposed to sound levels above 90 dBA for any eight hour shift of a 40 hour work week. Silencing Mufflers help plants meet this OSHA requirement by reducing the sound to safe levels below 90 dBA. This also eliminate harmful dead end pressures.

Features:

• Overall Length, in/mm  (A): 3.13 / 80 
• Diameter, in/mm: 1.64 / 41 
• Thread Size: 1/8 MNPT