Exair 1002SS 1/4 FNPT 303 Stainless Steel Safety Air Nozzle

Features:

• The EXAIR Safety Air Nozzle ejects a small amount of compressed air 360° around the outer ring, which combines with the air released from the center hole to produce a high-volume, high-velocity blast of air.
• The slotted end allows air to vent safely and prevents blocking of the outlet.
• Type 303 Stainless Steel - This is the most common grade of stainless steel. It offers good strength and is best suited to mildly corrosive environments. It can withstand temperatures up to 800°F (427°C).
• 1/4 FNPT St. St. Safety Air Nozzle

Application

• Part cleaning
• Chip removal
• Liquid blowoff
• Part cooling
• Material conveying
• Part ejection
• Fiber conveying
• Air assist

Advantages

• Reduced compressed air cost
• 10 dBA average noise reduction
• High velocity airstream
• Compact
• Installs with a socket wrench
• Meets OSHA noise level requirements
• Meets OSHA pressure requirements

How EXAIR Air Nozzles Work:

• An Air Nozzle uses the Coanda effect to amplify compressed airflow up to 25 times or more.
• Compressed air is ejected through a series of nozzles on the outer perimeter.
• As the air travels along the outer wall of the nozzle, surrounding air (blue arrows) is entrained into the stream.
• The airstream that results is a high volume, high velocity blast of air at minimal consumption.
• The air is always ejected so it can vent safely, well below OSHA dead end pressure requirements, should the nozzle end be blocked.