Crosby Straightpoint G2160-500t Wide Body Shackle, 500 t Working Load Limit

Bolt-Type Shackles can be used in any application where round pin or screw pin shackles are used. In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate. The bolt-type shackle's secondary securement system, utilizing a nut and cotter, eliminates the requirement to tighten nut before each lift or movement of load.

Features:

• All sizes are Quenched and Tempered for maximum strength.
• Increases usable sling strength a minimum of 15% and greatly improves life of wire rope slings.
• Can be used to connect synthetic web slings, synthetic round slings or wire rope slings.
• All sizes Quenched & Tempered for maximum strength.
• Forged alloy steel from 7 through 300 metric tons.
• Proof tested as follows:
  • 400 metric tons to 800t : 2 x WLL
• All ratings are in metric tons, embossed on side of bow.
• G-2160 (75t and larger), bows are furnished Dimetcoted; Pins are Dimetcoted, then painted red.
• Approved for use at -40° C (-40° F) to 204° C (400° F).
• Bow and bolt are certified to meet Charpy impact testing of 42 Joules (31 ft-lb) min. avg. at -20° C (-4° F).
• All 2160 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order.
• Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order.
• Type approved and certification to DNV Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. Databook is provided that includes required documents.
  • Serialization / Identification
  • Material Testing (physical / chemical / Charpy)
  • Proof Testing
• All Crosby 2160 shackles are capable of inline bow to bow assembly.

For more information, please see Data Sheet