TOA HX-7B-WP Variable Directivity Speaker 5.5" Woofers 1" WaveGuide-Loaded HF Compression Drivers 750W 8Ohm Weather-Resistant Black

The HX-7B-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in vertical directivity. Its adopted wave front control technology is ideal for reproducing clear sound in spaces with long reverberation times or high background noise. The speaker is designed to be installed under the eaves when used outdoors.

Features:

• High power handling
• Speaker design consists of four integrated modules that can be adjusted individually to optimize the vertical dispersion angle
• Built-in isophasic wavefront control horn with compression driver ensures precise HF control and superior reproduction of HF sounds
• 0° mode facilitates the most effective line array set-up
• Easily adjustable vertical dispersion angle

The speaker shall be a sealed-type line array speaker system consisting of 4 individual boxes or "cells" made of polypropylene resin, each measuring 497 mm W x 166 mm H x 274 mm D (19.57" W x 6.5" H x 10.79" D). Each cell shall contain two 5.5" low-frequency cone speakers, symmetrically positioned on either side of the front baffle, and flanked by bass reflex-style form elements at the outer edges. A multi-slotted, high-frequency waveguide manifold shall be located between the low-frequency drivers and be rear-loaded with a 1" high-frequency compression driver. A rust-proof surface-treated steel punched grille shall be mounted to the front baffle of each cell and shall be removable if necessary. The four cells shall be vertically arranged and mechanically and electronically integrated to operate as a single unit. Mechanical integration shall be accomplished using metal pivot joints between cells and an adjustable, multi-segment steel spine running along the back.

The vertical angle between each cell shall be adjustable in 15-degree increments to achieve a total vertical coverage angle between 0 and 45 degrees. An optional extender bracket shall allow vertical angle expansion up to 60 degrees. The horizontal coverage angle shall be fixed at 100 degrees. The system shall be capable of delivering true line-array projection and consistent front-to-back room coverage. The speaker shall incorporate an internal crossover network dividing the input signal at 1.7 kHz between low-frequency and high-frequency drivers. Electrical connection shall be made via M4 screw terminals located on the rear panel of the middle cell, and the speaker shall have a rated impedance of 8 ohms. The speaker shall produce a sound pressure level of 100 dB with 1 W input measured at 1 m and shall be capable of handling up to 750 W continuous program power.

Package includes:

• Speaker
• Terminal cover x 1
• Terminal cover mounting screw x 4
• Rubber packing x 1

For more information, please see Data Sheet