Thor Broadcast H-IPRF-32QAM IP to 32 RF Agile QAM Edge Modulator

The H-IPTV-QAM modulator is a simple all-in-one utility device to convert IP Transport Streams in UDP / RTP into non-adjacent QAM Channels. This Thor Broadcast high-density IP to QAM modulator is designed to take content delivered via an IP backbone or CDN system and modulate the programming onto digital QAM cable channels for distribution over coax. This product includes a 1RU chassis supporting two individual Ethernet inputs injecting up to 840Mbps on each Ethernet RJ45 connector outputs all programming onto a single RF F-Type connector for easy output into your RF Coax infrastructure. This single RU form factor allows you create your own IPTV to RF headend in a single chassis. All QAM Channels and IP inputs are managed from the easy to use NMS RJ45 port connection on the front of the unit allowing you to quickly and easily access your programming from Thor's easy to read GUI that can be accessed from anywhere on your network. The IPTV programming input is standard headend format, meaning basic UDP / RTP unicast/multicast IGMP v2 / v3 addresses and port format. This impressive density allows a single chassis to convert an IPTV Ethernet backbone feed to be converted to a full lineup of digital cable DVB-C channels for easy distribution.

Thor part number H-IPTV-QAM systems are specifically designed to utilize bandwidth to the incoming IP Transport Streams and reallocating that bandwidth on the RF QAM frequencies. The amount of programs that you are able to inject into the QAM systems is only limited by the bandwidth provided. Essentially you can create a lower amount of HD (High Definition) programming or an extensive amount of SD (Standard Definition) programming. This can even trasnport IPTV 4K streams and convert them to QAM cable channels. The 16 non-adjacent QAM channels are uniquely setup in the NMS so you can place them in any QAM headend that will allow programming to be set and configured in any channel lineup. With auto or manual PID remapping functionality, you'll be able to set exactly the channel configuration of your choice allowing added flexibility to the customization of your channels. Maximizing these Gigabit Ethernet ports will allow input up to 840mb/s each producing 16 QAM Channels. Creating your own custom headend has never been easier using Thor Broadcasts newest IPTV to-QAM CATV headend in a box.

Features:

• IPTV Modulator includes 2x Gigabit Ethernet input interfaces
• 16 Clear QAM Channel Outputs - Non-Adjacent 50-960Mhz
• Maximum 1024 Channels TS over UDP, RTP & Unicast / Multicast
• Output Of RF on 16 Multiplexed, Scrambled, or QAM (DVB-C) Channels 
• Gigabit Ethernet is serviced by SFP interface
• Supports Unicast and Multicast, supports IGMP v2 / v3
• Max 840Mbps for each GE Input
• Supports Up to 180 PIDs per channel with PID remapping (manual or auto)
• Web NMS (Network Management Software) for easy online access and management