Sievert HAK1-30 Hot-Air Detail Kit with 25' Hose

Hot-Air Detail Kit

For detail work, heat welding of end laps, and drying of membranes. Provides controlled heat with no exposed flame for safety. Piezo ignition and a dead mans grip feature offer unparalleled convenience.

Features:

• Lower temperature than an open flame.
• The hot air stream is directed straight forward while the temperature falls down heavily at the sides.
• The risk of injury to personnel and damage to materials is greatly reduced.
• Work with the burner is done from a distance of only one inch from the material. This promotes even control of the heated area.
• Reduces equipment requirements (i.e. electrical cords, generators, outlets) needed by other types of hot air equipment.
• Hot-air burners are designed to always work with an ample supply of air in order to provide complete combustion.
• No non-combustible gas can be ignited in an unexpected area.

The kit consists of:

• 2981-47 Hot air welder; 50-85,000 BTU/hr; 1500°F
• 1525IS 25 ft. U/L listed hosed
• 3061-13 Adjustable regulator 14-57 psi
• 3200-01 Quick connect (hose, handle)