Myron L SMP50 Surface Mounting Plate for 750II Series

A Surface Mounting Plate (SMP50) may be required when access to the back side of the mounting site is impractical or if the Monitor/controller must be mounted on a solid wall.

The SMP50 comes with the proper hardware to mount the Monitor/ controller to the SMP, however, the installer must provide the four (4) additional screws/bolts to mount the SMP to the wall or fixture. Their size is to be determined by the user.

• Select your mounting location. Mark and drill the four (4) required mounting holes. For hole locations, use the SMP as a template.
• Drill the corner holes in the SMP according to the size of the screws or bolts selected.
• Attach and securely fasten the SMP to the Monitor using the 1/4" X 20 X 3/8" screws provided.
• Mount the SMP to the prepared site using the selected screws or bolts.