Myron L CS40HT-1-JB-25 Conductivity High Temp. Sensor 0-10 uS/0-20000 ppm for 750II Monitor/Controller w/ Junction Box & 25' Cable

The Myron L Model CS40 sensor has been designed for a broad measurement range in difficult process conditions. It can be installed in submersion, insertion, or wet-tap configurations, and is good for most applications from high purity water to high chemical concentrations.

Wetted materials of construction are 316 stainless steel and Kel-For Teflon, depending on the range of temperature required. All possible leak paths through the sensor
are double sealed with EPR O-rings for maximum on-stream reliability. The first O-ring protects the second O-ring from chemical attack, giving more than double the service life that can be expected from single sealed units.
Process connections are made via a bored through swage fitting with 3/4" NPT threads. This fitting can be screwed into a line, a tank, or the optional wet-tap valve (WTV) assembly. It can also be turned around and connected to a standpipe for use in a submersion configuration. Available sensor constants of 0.05, 0.1, 1.0 & 10.0 provide the broadest range of applications of any of sensor models.

Advantages:

• Economic Value
• Standard 100 psi at 150°C/Hi-Temp 250 psi at 205°C
• Broad Measurement Range
• Many Applications

For more information, please see Data Sheet