Jomar 800-107ADDG Lead Free Emergency Shut-off Device, Size 1-1/2"

Emergency shut off device for copper tubing eliminates shutdowns. Allows replacement of defective valve or installation of new valve in 30 minutes or less* without shutting off water. Add-A-Valve may be installed on:

• Potable hot/cold water
• Water/glycol systems.

Features:

• Dezincification Resistant Brass Alloy
• Eliminates Facility Shutdowns
• Cuts Through Copper Tubing with a Hardened Steel Stem Cutter
• Expands a Viton Seal Across Cut to Stop the Flow
• No Pipe Freezing, No Bulky Nitrogen Tanks, No Complete Shutdown
• Bottom Cleanout Cap Serves as Line Tap
• Lead Free Sweat Ball Valve included in Package
• Loc-Tite Gasket Sealant Included
• U.S. and Canadian Patent No. 5,316,037
• Can be Installed on Potable Hot/Cold Water and Water/Glycol Systems
• Wetted Surfaces Contain Less than .25% Lead Content

Approvals:

• IAPMO Certified - NSF 372

Pressure Rating

• 220°F x 250 PSI

Installation Note

• For sizes 1-1/4" - 2" you MUST have 2 people
• Install only on Type K, L, or M Copper
• Add-A-Valve is not meant to be installed multiple times, use only once as an emergency device
• *Not for use on steel pipe
• *Not for use on air systems.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.