Jomar 800-104ADD Regular Brass Emergency Shut-off Device, Size 3/4"

This emergency shut off device for copper tubing eliminates shutdowns and allows the replacement of a defective valve or an installation of new valve in 30 minutes or less without shutting off the water. Add-AValve may be installed on:

• Hot/cold water
• Water/glycol systems

Features:

• Eliminates Facility Shutdowns
• Cuts Through Copper Tubing with a Hardened Steel Stem Cutter
• Expands a Viton Seal Across Cut to Stop the Flow
• No Pipe Freezing, No Bulky Nitrogen Tanks, No Complete Shutdown
• Bottom Cleanout Cap Serves as Line Tap
• Lead Free Sweat Ball Valve included in Package
• Loc-Tite Gasket Sealant Included
• U.S. and Canadian Patent No. 5,316,037
• Can be Installed on Hot/Cold Water and Water/Glycol Systems

Pressure Rating

• 220°F x 250 PSI

Installation Notes

• For sizes 1-1/4" - 2" you MUST have 2 people
• Install only on Type K, L, or M Copper
• Add-A-Valve is not meant to be installed multiple times
• Use only once as an emergency device
• *Not for use on potable water systems
• *Not for use on steel pipe
• *Not for use on air systems

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.