Jomar 400-103 Slow-Drying Soft-Set General Purpose Thread Sealant, 8 oz. can

Slow-Drying Soft-Set General Purpose Thread Sealant

Features:

• Jomar's Green Stuff is a slow drying, soft setting, non-hardening pipe thread compound. It will not transfer taste or odor to the system being sealed. Excellent for food and water systems. It is lead free, anti-galling, non-corrosive, nontoxic, and will not harden in can.

Directions:

• Stir well before using. Clean threads. Brush liberally onto male threads only. Apply appropriate torque to joint as required.

Temperature and Pressure Ratings:

• Brushable to: -50°F (-45°C)
• Temperature Range: -50°F to 400°F (-45°C to 204°C)
• Pressure Ratings: Gas - 3000 PSI (211 kg/cm²); Liquid - 6000 PSI (422 kg/cm²)
• VOC: 342 g/l

Approvals:

• NSF Certified: -NSF 14 (PW, DWV, SW); -NSF 61 (C.HOT 180°F); -NSF 372
• CSA Certified (1/4" - 2"): -CAN/ULC-S642 (125 PSIG) -ANSI LC7 (125 PSIG)
• Meets Mil. Spec. TT-S-1732

Recommended for use with:

• Acids, Diluted
• Air, Compressed Gaseous
• Alkalis, Diluted
• Ammonia
• Aliphatic Solvents
• Brine
• Butane
• Carbon Dioxide
• Castor Oils
• Chlorinated Water
• Coal Tar Naphtha
• Cutting Oils
• Diesel Fuel Oil
• Freon (All)
• Gasoline*
• Glycol
• Heating Oils
• Helium Gaseous
• Hydraulic Oils
• Hydrogen
• Inert Gases, Gaseous
• Jet Fuel (JP 3,4,5)
• Kerosene
• Lacquer
• Liquefied Petroleum Gases
• Manufactured Gases
• Mineral Oils
• Natural Gas
• Nitrogen, Gaseous
• Petroleum Solvents
• Propane
• Refrigeration Gases
• Soap, Liquid
• Steam Lines
• Sugar, Liquid
• Vegetable Oils
• Water (Hot or Cold)
• NOT FOR USE ON OXYGEN SYSTEMS

Recommended for use on:

• All types of metal
• ABS
• PVC
• CPVC
• Delrin
• Zytel
• Fiberglass
• Nylon
• Polypropylene
• Polybutylene
• Polyethylene