Jomar 400-001 Slow-Drying Soft-Set PTFE Thread Sealant, 2 oz. tube

Jomar's White Stuff is a slow drying, soft setting, non-hardening PTFE pipe thread compound. It will not transfer taste or odor to the system being sealed. Excellent for food and water systems. It is lead free, anti-galling, non-corrosive, nontoxic, and will not harden in can.

Directions:

• Stir well before using. Clean threads. Brush liberally onto male threads only. Apply appropriate torque to joint as required. Joint may be made up immediately or within four hours as desired.

Temperature and Pressure Ratings:

• Brushable to: -50°F (-45°C)
• Temperature Range: -50°F to 400°F (-45°C to 204°C)
• Pressure Ratings: Gas - 3000 PSI (211 kg/cm²); Liquid - 8000 PSI (562 kg/cm²)
• VOC: 344 g/l

Recommended for use with:

• Acids, Diluted
• Air, Compressed Gaseous
• Alkalis, Diluted
• Ammonia
• Aliphatic Solvents
• Brine
• Butane
• Carbon Dioxide
• Castor Oils
• Chlorinated Water
• Corrosives
• Coal Tar Naphtha
• Cutting Oils
• Diesel Exhaust Fluid
• Diesel Fuel Oil
• Fatty Acids (Liquids)
• Freon (All)
• Gasoline*
• Glycol
• Heating Oils
• Helium Gaseous
• Hydraulic Oils
• Hydrogen
• Inert Gases, Gaseous
• Jet Fuel (JP 3,4,5)
• Kerosene
• Lacquer
• Liquefied Petroleum Gases
• Manufactured Gases
• Mineral Oils
• Naphtha
• Natural Gas
• Nitrogen, Gaseous
• Petroleum Solvents
• Propane
• Refrigeration Gases
• Soap, Liquid
• Steam Lines
• Sugar, Liquid
• Vegetable Oils
• Water (Hot or Cold)
• Xylol
• NOT FOR USE ON OXYGEN SYSTEMS

Recommended for use on:

• All types of metal
• ABS
• PVC
• CPVC
• Delrin
• Zytel
• Fiberglass
• Nylon
• Polypropylene
• Polybutylene
• Polyethylene