IBI Scientific SS-2003C TUNAIR Full-Baffle Polypropylene Erlenmeyer Flask Kit 300 mL w/ Dri-Gauze Filters

TUNAIR™ Polypropylene Erlenmeyer Flask Systems: Optimized for Superior Growth

The TUNAIR™ Polypropylene Erlenmeyer Flask systems by IBI Scientific are a unique and patented solution, specifically designed for microbiology and biotechnology applications. These flasks provide optimal growth conditions for aerobic microorganisms, mammalian cells, and plant cells, outperforming standard Erlenmeyer flasks in both culture growth and productivity. The high oxygen absorption rate is achieved through the innovative baffling and turbo-vane closure design, enhancing the availability of dissolved oxygen and improving cell yields. Each Full-Baffle Shake Flask, with a working volume of 100 ml, features six baffles that create a propeller motion, ensuring efficient mixing and aeration.

The TUNAIR™'s high oxygen absorption rate is due to the unique baffling and turbo-vane closure design. The TUNAIR™ systems are designed to increase the availability of dissolved oxygen as well as improve cell yields. The Full-Baffle Shake Flask has six baffles that produce a propeller motion. The working volume is 100 ml.

The Dri-Gauze filter is 0.22 micron and constructed of nitrocellulose. Each filter can be used 10 - 12 times. The Dri-Gauze filters can be autoclaved in the cap.

The two piece cap assemblies are constructed of polypropylene and are resistant to most solvents. All flasks and caps are fully autoclavable prior to reuse and filter linings can also be autoclaved or simply replaced.

Other Product Details:

• Comes complete with twelve (12) polypropylene 300 ml Full-Baffle TUNAIR™ Shake Flasks, twelve (12) two-piece caps, and fifteen (15) dri-gauze filters.

Filter Replacement:

To replace the filter lining in the cap assembly, simply pinch the flanges of the inner-closure shell until they snap loose. Then, pull apart and remove used lining. Replace the lining by sandwiching it between two parts of the cap and snap the cap back together. When reassembling the cap, ensure the flanges from the inner piece snap into the mated grooves in the outer piece.

This will ensure the cap assembly stays together during use.

All TUNAIR™ flasks and caps can be cleaned by soaking in water with a light detergent solution to loosen dirt and contaminants, then air dry.

300 ml flask:

Allows for approx. 150 ml (max) of working volume for culturing cells

Full-Baffle:

The bottom inside of the flask has 6 raised baffles. This configuration will generate 4 small propeller vortexes within the media inside the flask when fastened to an orbital shaker. The full-baffle configuration allows for slower operational rpm of the shaker while maintaining the vortexes within the media. The full-baffle flask is ideal for growing E.coli providing superior growth rates and cell densities. The 300 ml flask and 2.5 L flask both have a special cap and filter system that promotes gas exchange and maintains sterility of the growth culture during use. The inner portion of the cap unsnaps from the outer portion by pushing in the tabs on the side of the cap assembly and then pulling the insert out.

Two Piece Cap:

The 300 ml flask and 2.5 L flask both have a special cap and filter system that promotes gas exchange and maintains sterility of the growth culture during use. The inner portion of the cap unsnaps from the outer portion by pushing in the tabs on the side of the cap assembly and then pulling the insert out.

0.2-micron filters: 

Dri-Gauze - This is a paper filter than can be used approx. 6 to 8 times before having to be replaced. This filter can be autoclaved while in the cap, on the flask, for 6 to 8 times.

Cap & Filter assembly: 

Once you have the 2-piece cap assembly apart place the corresponding filter size inside the cap and the re-assemble the inner and outer cap pieces making certain to align the tabs with their associated holes. Once clipped into place, make certain the filter completely covers the cap assembly openings. 

Attaching the flasks to your shaker: 

IBI TUNAIR flasks can be used with nearly all standard shakers and shaker clamps. The 300 ml flask typically fits best in the 250 ml shaker clamp.

Preparing and Cleaning the TUNAIR flask: 

Your TUNAIR flasks are constructed of polypropylene plastic which allows them to be autoclaved. Once you have prepared your media inside the flask you can place the cap & filter on the flask and insert into the autoclave. Set the autoclave for wet cycle.   

Once you have harvested your cells, wash the TUNAIR flask in a mild dish soap such as Dove Dish Soap then rinse well with DI water. Do NOT rinse the Dri-Gauze filter between uses. Observe the condition of the filters between runs to make certain there are no holes or tears in the filter. If there are, replace the filter immediately.