Dynalon CT50BS Centrifuge Tube 50 mL Sterile Standing Bulk, PP/PE

Centrifuge tubes are manufactured out of USP Class VI Polypropylene and provide excellent chemical resistance. These tubes are intended for single use only; reuse is not recommended as breakage or leakage may occur. Specific operating conditions, especially temperature, volume, RCF, rotor type, carrier design, and run length can affect tube performance.

Features:

• Virgin polypropylene that meets USP Class VI requirements
• Sterile
• Nonpyrogenic
• RNase /DNase and endotoxins free
• 3-year shelf life at controlled storage conditions
• Suitable for most disposable centrifuge applications

Application Guidelines

Dynalon's tubes are rated up to a maximum relative centrifugal force (RCF) of 15,000 xg depending on the size and format of the tube (self-standing or not). These ratings have been established at room temperature using tubes filled to the maximum stated volume with water and spun in a fully-supported rotor for 5 minutes.

To determine the speed (rpm) at which maximum RCF is achieved for your rotor, please consult your centrifuge manufacturer's specifications.

Recommended working temperature range is 0°C to 40°C. Storage temperature range is -80°C to 12140°C. When freezing solutions, volume should not exceed 80% of the recommended capacity. Autoclavable for 15 minutes at 121°C/15 psi. Loosen cap before autoclaving. Always conduct a trial run to determine proper conditions for steps 1 through 6 before any critical use.

For more information, please see Data Sheet and Brochure