Dakota Alert SR-4000 Smart Receiver 2.4 / 5 GHz Wi-Fi Network

The SR-4000 is the receiver only.  You will need a 4000 Series transmitter to make a complete system.  The receiver connects to your local Wi-Fi and will send push notifications to your smart phone via the Dakota Alert App.  You can program up to 16 different sensors to the SR-4000.

Features:

• The SR-4000 is the receiver only.  You will need a 4000 Series transmitter to make a complete system.
• The SR-4000 will connect to your local 2.4 or 5 GHz Wi-Fi network and will send a push notification to your smart phone via the Dakota Alert app any time a sensor is activated.
• Easy installation- Up to 16 sensors can be paired with one receiver or an unlimited number of receivers can be paired to one sensor. Simple code-learning technology means you can have this set up in minutes. The receiver will play one of 16 tunes whenever a signal is received.
• Will give relay and/or 12 VDC output when a signal is received. The two Form "C" relays can be connected to an alarm control or home automation panel (not included) to act as a hard-wired zone for the panel.
• The 12 VDC output can be used to power a bell, siren, strobe or any other 12 VDC device (not included).
• The output duration can be set for either 1, 5, 15 seconds or 5 minutes.
• Four different volume levels to give you just the right sound level for your application.