Canfield Connector D5429-11042 D5400 Series Micro Solenoid Driver ISO Ground Left and Right, 40 percent, 12 - 24 VDC

The Canfield Connector D5400 Series Micro Solenoid Driver is a NEMA 4 DIN Style "A" EN175301-803 (Formerly DIN 43650) and MINI type connector with a built in electronic circuit used to induce solenoid pull-in and reduce holding current. The time proven MSD has been designed into many applications where heat buildup occurs which reduces operating efficiency and life span of solenoid valves.

The MSD has two main functions: one is to induce faster or stronger than usual response times at solenoid pull-in, the second is to reduce the net wattage of the solenoid during hold-in. The MSD drives the coil with a high input voltage for a fixed time period until the coil has shifted at which time the MSD reduces the holding voltage, which saves power, and the solenoid runs cool.

The MSD is often used to replace low voltage power supplies where a 24 VDC solenoid valve can then be operated by 120 VAC. The Alternating current is rectified and the duty cycle reduced so as to operate the valve at proper voltage and wattage ranges. An additional advantage can be found when the MSD drops the holding voltage, which then reduces heat and current requirements.

Features:

• Speed operator cycle rates with greater consistency
• Enable coils to be energized for extended periods without burnout
• Save energy by reducing overall coil consumption
• Reduce hold-in voltage to reduce coil heat related losses
• Enclosure NEMA 4 accepted
• MINI or DIN 43650 Form "A" / ISO 4400, EN175301- 803:2000 electrical connector enclosure saves hook up space and is a generally accepted quick connect interface
• Increases coil life expectancy
• All versions have LED indicator lights
• 9 ft cable is standard on all versions
• Each connector kit contains screw, washer and gasket assembly.

Note: Slight discoloration may occur to translucent material after prolonged exposure to UV rays.

For more information, please see Data Sheet