Altelix NS322416VFA1C-DIN NS Series 32x24x16 Industrial DIN RAIL Steel Weatherproof NEMA Enclosure with Dual Cooling Fans Dual 120 VAC Duplex Outlets

The Altelix NS322416VFA1C-DIN Steel Fan Cooled Weatherproof Industrial DIN Rail Enclosure with 120VAC Power is ideal for protecting DIN rail mounted equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.

DIN Mounting Rails

Included with this enclosure are (2) DIN Mounting Rails. These rails mount to the interior of enclosure and are designed for use with (3) 35mm top hat DIN rails included with the enclosure. This versatile DIN rail mounting system runs the full length of the enclosure from top to bottom. This allows the Top Hat DIN rails to be mounted easily in any of 26 locations providing the flexibility needed when configuring the enclosure for specific user requirements. Hardware for mounting the Top Hat DIN rails is included.

Construction and Features

This rugged enclosure features continuous seam welded 18 Gauge (1.2mm thick) steel construction. The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and dual quarter-turn latches to secure the enclosure. Internal grounding studs are provided on both the door and enclosure.

Both the enclosure and door are finished in a rugged epoxy polyester textured light gray powder coat finish.

Bonus Aluminum Bottle Opener Key

This enclosure now includes HN-0008 Aluminum Bottle Opener Key. This heavy duty aluminum door locking key easily attaches to most key chains. And it makes a great bottle opener too!

Removable Power and Fan Module

The NS322416VFA1C-DIN features a removable power and fan module that attaches to the bottom of the enclosure. Constructed of rugged aluminum, this can be easily removed for servicing and is fully gasketed to ensure a proper seal. This power module features two pre-wired duplex 120VAC power outlets (4 outlets total) and a pre-wired 5 foot power cord, so no additional wiring is required.

Dual Cooling Fans Ventilation

This enclosure features dual 3" vents and dual thermostat controlled cooling fans. The low noise, high airflow fans helps maintain lower internal temperatures by allowing air to be either pushed or pulled through the enclosure. The fans turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Both fans are wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use.

Mounting

Mounting holes are provided inside the enclosure for mounting to a wall or other structure.

Cable Glands

The enclosure features two unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.

Features:

• Includes (3) 35mm Top Hat DIN Rails and DIN Rail Mounting System with 26 Positions
• Dual Thermostat Controlled Cooling Fans
• (4) Pre-Wired 120VAC Outlets and 5 Foot Power Cord
• Heavy Duty Continuous Seam Welded 18 Gauge Steel Construction
• Dual quarter-turn door latches with key
• Bonus Aluminum Bottle Opener Key Now Included!
• Epoxy polyester textured light gray powder coat finish
• NEMA Type 3R, 3RX / IP24 Rated

Applications:

• DIN Rail Mount Equipment
• Industrial Controls
• Building Automation
• Agricultural Controls
• Environmental Monitoring Stations
• SCADA Remote Terminal
• DIN Mount Power Relays and Terminals
• Security & Surveillance Equipment
• Access Controls
• Protection of Equipment from Theft or Damage