Altelix NP17GYVFA1C-NUC1 NP Series Polycarbonate Fan Cooled Weatherproof Enclosure for ASUS/Intel NUC Pro 10 NUC Pro 11 NUC Pro 12 NUC Pro 13 Mini PC

The Altelix NP17VFA1C-NUC1 Enclosure is a weatherproof fan-cooled enclosure designed to provide the ultimate protection for the ASUS® / Intel® NUC Pro Mini PC and is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet.

NUC Pro Mini PC Mounting Cradle

The Altelix NUC enclosure includes an easy to use mounting cradle designed specifically for the NUC Pro Mini PC. It securely holds and NUC Pro Mini PC while providing access to all ports without restricting airflow for cooling. To mount the NUC Pro Mini PC power supply an additional mounting bracket is provided with retention straps to keep it in place. This enclosure is compatible with the following NUC Pro Mini PCs:

• ASUS® / Intel® NUC Pro 13 Mini PC
• ASUS® / Intel® NUC Pro 12 Mini PC
• ASUS® / Intel® NUC Pro 11 Mini PC
• Intel® NUC Pro 10 Mini PC*

*Installation Note:

Installation of the Intel® NUC Pro 10 Mini PC requires an additional spacer which is included with the enclosure.

Install Your NUC Pro Securely Outdoors

This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock.

Plug and Play Setup

The NP17VFA1C-NUC1 enclosure provides easy plug-n-play installation. Once the NUC Pro Mini PS and power supply are securely mounted inside the enclosure, connect the power supply to the internal 120VAC power outlet. Cable glands on the enclosure allows cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running.

Cooling Fan Ventilation

To keep your NUC Pro Mini PC running cool, this enclosure features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure.

Mounting

The NP17VFA1C-NUC1 enclosure can be wall mounted using the included wall anchors.

Features:

• Mounting cradle designed for the ASUS® / Intel® NUC Pro Mini PC provides access to all ports without restricting airflow for cooling
• Mounting bracket with retaining strap for the NUC power supply
• Plug-and-Play Design, No Electrical Wiring Required
• Dual 3" Vents and Thermostat Controlled Cooling Fan
• ABS + Polycarbonate Enclosure
• Gasketed Lid with Tamper-Proof Locking Screw
• Dual Door Latches
• Features a RF Transparent PVC Non-Metallic Equipment Mounting Plate
• (2) Pre-Wired 120VAC Power Outlets with Pre-wired 5 Foot Power Cord
• NEMA Type 3R, 3RX / IP24 Rated
• Includes Wall Mount Hardware and Cable Grommets

Applications:

• ASUS® / Intel® NUC Pro 10 Mini PC
• ASUS® / Intel® NUC Pro 11 Mini PC
• ASUS® / Intel® NUC Pro 12 Mini PC
• ASUS® / Intel® NUC Pro 13 Mini PC
• Outdoor Installations
• Protection of NUC from Theft or Damage
• Concealment of Equipment
• Retail and Commercial Computer Terminals
• Rapid Deployment
• Emergency Networks
• Harsh Environments