Altelix NP17GYVFA1C-NTG2 NP Series Weatherproof Enclosure for Netgear AC1200 Dual Band Access Point WAC104 with Cooling Fan 120VAC Outlets

The Altelix WAC104 Enclosure is a weatherproof fan-cooled enclosure designed to provide indoor or outdoor protection for the Netgear® AC1200 Dual Band Access Point, model WAC104.

Install Your Netgear® Access Point Securely Outdoors

This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock.

Access Point Mounting System

The mounting bracket installed inside the enclosure featured two key-slot pins used to secure the WAC104 access point to the plate. Simply line up the keyholes in the access point with the key-slot pins on the mounting bracket and slide down to lock into place. To remove the access point, press down on the thumb lock release and slide up.

RF Transparent Design

The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Plug and Play Setup

The NP17VFA1C-NTG2 enclosure provides easy plug-n-play installation. Once the Netgear® WAC104 access point is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland on the enclosure allows cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running.

Cooling Fan Ventilation

The NP17VFA1C-NTG2 enclosure features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure.

Mounting

The NP17VFA1C-NTG2 enclosure can be wall mounted using the included wall anchors.

Features:

• Designed to fit the Netgear® AC1200 Dual Band Wireless Access Point, Model WAC104
• Dual 3" Vents and Thermostat Controlled Cooling Fan
• ABS + Polycarbonate Enclosure
• Gasketed Lid with Tamper-Proof Locking Screw
• Dual Door Latches
• Features a RF Transparent PVC Non-Metallic Equipment Mounting Plate
• Internal Pre-Wired 120VAC Outlets with Pre-wired 5 Foot Power Cord
• NEMA Type 3R, 3RX / IP24 Rated
• Includes Wall Mount Hardware and Cable Grommets

Applications:

• Outdoor Wireless Network Installations
• Protection of Router from Theft or Damage
• Concealment of Equipment
• Deployment of Hospitality Wireless Networks
• Retail and Commercial Wireless Networks