Altelix NP14GYVP-UBQ2 NP14 Series Gray Vented Weatherproof Enclosure for Ubiquiti UniFi Access Hub UA-Hub

Altelix is excited to offer the newly redesigned NP14 series enclosures. Some of the new features include:

• Dual stainless steel latches
• Multiple mounting options - (4) external mounting feet and internal mounting points
• Deeper enclosure base
• Increased number of multiple sized knock-out holes provided on bottom of enclosure

The Altelix Vented Access Hub Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection from weather or tampering for the Ubiquiti Unifi® UA-Hub Access Hub.

Install Your Access Hub Securely Outdoors

This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual stainless steel latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Ubiquiti Unifi® Access Hub. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Easy Setup

The PVC equipment mounting plate of the NP14VP-UBQ2 features a pre-installed 35mm top hat DIN rail for mounting the Ubiquiti Unifi® UA-Hub. Special cable glands on the enclosure will allow a terminated Ethernet cable to be connected to the access hub.

Multiple Mounting Options

This enclosure features (4) external mounting feet which can be used for wall mounting or with optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.

Features:

• New and Improved design provides better versatility and security
• Designed to fit the Ubiquiti Unifi® Access Hub UA-HUB
• Two 3" vents with rain shields and screens
• ABS + Polycarbonate construction
• Gasketed lid with tamper-proof locking screw
• Dual stainless steel door latches
• Features a PVC equipment mounting plate with 35mm top hat DIN rail
• NEMA Type 3R, 3RX / IP24 rated
• Integral mounting feet
• Includes wall mount hardware, cable glands and grommets

Applications:

• Networked single door controller
• Secure building access systems
• Security gate control systems
• Outdoor installations
• Protection of access hub from theft or damage
• Concealment of equipment