Altelix NP14GNVM-UBQ-02 NP14 Series OD Green Vented Weatherproof Enclosure for Ubiquiti UniFi U6+ Access Point

  • Specification
  • Overview
  • Customers Also Bought
  • Your Recently Viewed Items
  • Reviews
Altelix NP14GNVM-UBQ-02 NP14 Series OD Green Vented Weatherproof Enclosure for Ubiquiti UniFi U6+ Access Point
Click to zoom

Contact Us

  • Brand:Altelix
  • Part #:NP14GNVM-UBQ-02
  • Model #:NP14 Series

Contact Us
Safe Checkout
Fully secured
Money back Guaranty
100% satisfaction

Overview


The Altelix Vented nanoHD Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection for the Ubiquiti Unifi® U6+ access point. This non-powered enclosure is ideal for installations powering the Ubiquiti Unifi® U6+ via PoE only.

Install Your U6+ Access Point Securely Outdoors

This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Ubiquiti Unifi® U6+. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Easy Setup

The equipment mounting plate of the NP14VM-UBQ-02 is pre-drilled to except the mounting bracket that comes with the Ubiquiti UniFi® U6+. Simply attach the mounting bracket to the plate and then install the access point. Once the U6+ is securely mounted inside the enclosure, a special cable gland on the enclosure will allow a terminated Ethernet cable to be connected to the access point.

RF Transparent Design

The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Mounting

The NP14VM-UBQ-02 enclosure can be wall mounted using the included wall anchors.

Features:

  • Designed to fit the Ubiquiti Unifi® U6+ Access Point
  • Two 3" vents with rain shields and screens
  • ABS + Polycarbonate Enclosure
  • Gasketed Lid with Tamper-Proof Locking Screw
  • Dual Door Latches
  • RF transparent design will not affect wireless signal range or coverage pattern
  • NEMA Type 3R, 3RX / IP24 Rated
  • Includes Access Point Removal Tool, Wall Mount Hardware and Cable Grommets

Applications:

  • Outdoor Wireless Network Installations
  • Protection of Access Point from Theft or Damage
  • Concealment of Equipment
  • Deployment of Hospitality Wireless Networks
  • Retail and Commercial Wireless Networks
  • PoE Installations
⚠️ Attention CA Residents: Prop 65 Warning

Reviews