Altelix NP14BKVFA1C-ARS1 NP14 Series Black Weatherproof Vented Enclosure for Arris SURFboard SB8200 SB6190 & SBG10 Cable Modems with Cooling Fan

Provide Television and Internet Cable Services to Outdoor Locations

The Altelix Cable Modem Enclosure is a vented fan cooled weatherproof enclosure designed to provide added security from vandalism and protection from harsh environments for Arris® SURFboard® modems.

Rugged Polycarbonate + ABS Construction

This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.

Cooling Fan Ventilation

This enclosure features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure.

Plug and Play Setup

The Altelix Cable Modem enclosure provides easy plug-n-play installation. Once the enclosure is mounted, attach the Arris® SURFboard® cable modem to the internal mounting bracket. Once seated on the mounting bracket, a thumb clip keeps it securely in place. Plug the Arris® SURFboard power supply into the pre-wired 120VAC power outlet then plug the enclosure's 5 foot power cord into a 120VAC power outlet and you are up and running. Cable grommets on the enclosure allow coax and Ethernet cables to be connected to modem. This enclosure is compatible with the following Arris® SURFboard® modems:

• Arris® SB8200 SURFboard® DOCSIS® 3.1 Cable Modem
• Arris® SB6190 SURFboard® DOCSIS® 3.0 Cable Modem
• Arris® SBG10 SURFboard® DOCSIS® 3.0 Cable Modem & Wi-Fi® Router

RF Transparent Design

The non-metallic design of the enclosure and equipment mounting plate is RF transparent and will not interfere with the WiFi signal range or coverage pattern of Arris® SURFboard WiFi cable modem models.

Complete with Cable Grommets and Glands and Wire Management Straps

For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Mounting

The enclosure can be wall mounted using the included wall anchors.

Features:

• Designed to fit Arris® SURFboard® Cable Modems
• Plug-and-Play Design, Easy to Install
• Dual 3" Vents and Thermostat Controlled Cooling Fan
• Features a RF Transparent PVC Non-Metallic Equipment Mounting Plate
• Pre-Wired 120VAC Power Outlet with 5 foot Power Cord
• Includes Wall Mounting Hardware
• NEMA Type 3R, 3RX / IP24 Rated
• Weatherproof and UV Stable
• Durable Polycarbonate + ABS Construction
• Gasketed Lid Featuring a Tamper-Proof Locking Screw with Key and Provision for Padlock

Applications:

• Protection of the Arris® SURFboard® Cable Modems from Theft or Damage
• Arris® SB8200 SURFboard® DOCSIS® 3.1 Cable Modem
• Arris® SB6190 SURFboard® DOCSIS® 3.0 Cable Modem
• Arris® SBG10 SURFboard® DOCSIS® 3.0 Cable Modem & Wi-Fi® Router
• Provide Cable Television and Internet Services to Outdoor Locations
• Concealment of Equipment