Altelix NHH100W-DIN-KIT DIN Rail Mountable Touch-Safe Heater Kit 100W with Thermostat and Power Cord

Features:

• Touch-Safe Design - reduces surface temperatures on the housing
• Easy to install, no wiring required
• 100W heating capacity
• Includes thermostat and pre-wired 2 foot power cord
• Compact size
• DIN rail mountable
• Low surface temperature

Applications:

• Add heating to existing enclosures or equipment cabinets
• Use with Altelix DIN Rail enclosures

The Altelix Thermostat Controlled DIN Rail Heater Kits provide a simple way to add heat for a wide range of applications. These DIN rail mountable heater kits can be used to retrofit existing equipment enclosures, equipment cabinets or as well as applications that require a heater to be installed.

Easy to Install - No Wiring Required. Installing these heater kits is simple since no electrical wiring is required. Simply mount the heater to a 35mm Top Hat DIN Rail (sold separately) and plug the pre-wired 2 foot power cord into a 120VAC power outlet.

Thermostat Controlled. The Touch-Safe PTC resistor heating element generate a high air-current of warm air due to the design which supports natural convection. The internal design of these heaters help reduce the surface temperatures on the accessible sides of the housing. The included thermostat turns the heater on when the internal temperature reaches 41°F (5°C) and turns off when it rises to 59°F (15°C). 

DIN Rail Mountable. The backside of these heaters feature an integral DIN rail clip allowing the heater to be attached to standard 35mm Top Hat DIN Rails.