Ace Glass 6427-270 Complete Jacketed Two-Piece Pressure Reactor with ACE SuperMagnet Stirring System, 100 mm Flange, 2000 mL

The following ACE heavy wall borosilicate glass Pressure Reactors have been designed and tested to provide the chemist with a system to perform low to moderate positive pressure reactions, synthesis, and catalysis; or simply to run reactions under inert gas conditions. Reactor capacity is 2000 mL and uses Ace-Threds to achieve a leak-tight system.

The reactor is the two-piece System, with a maximum pressure limit of 35 psig at 100°C. The Two-Piece System consists of a flanged flask and head with a shallow O-Ring groove, O-Ring, and quick-release clamp. Flange size is 100 mm inside diameter, allowing the use of large agitators and facilitating product removal and clean-out.

Features:

• Jacketed
• All inert materials
• Reactions at ambient or pressure conditions
• Filtering by vacuum and/or pressure
• Removable/changeable filters - screen or glass, wide choice of porosities
• Mechanical agitation
• Bottom drain valve
• Easy assembly/disassembly for cleaning
• Uses ACE "Super Magnet" Stirring components.

The reactor consists of:

• #15 PTFE Plug ("Complete" contains THREE) - 5846-48
• #25 PTFE Plug - 5846-50
• West Condenser with Ace-Threds - 6024-20
• Flask, Jacketed, 2000 mL, 100 mm flange top - 6427-18
• Head, 100 mm, #15 center neck, three side necks - 6433-35
• Pressure Reactor Manifold, complete - 6448-54
• Thermowell - 6471-14
• Clamp, 100 mm, "Quick Release" - 6517-25
• Addition Funnel, 150 mL - 7299-25
• #15 PTFE Bushing ("Complete" contains TWO) - 7506-27
• Flexible Shaft, complete, 91.4 cm - 8081-30
• Krytox® High Vacuum Grease - 8116-10
• Bushing, PTFE, #15 with O-Ring - 8648-19
• Polypropylene Tubing, 1/4-inch OD x 0.170-inch ID - 12681-10
• Stirrer Motor Controller, Solid State - 13530-10
• Stirrer Motor with Mounting Rod, Solid State - 13649-09
• Raised Ring PTFE Octagonal Stirrer Magnet - 13655-37
• "Super Magnet" Stirrer Magnet - 13660-50
• PTFE Sealing Tape, 1/2-inch Width - 14120-18

Does NOT include stand, base or clamps.