Ace Glass 6425-226 Complete Unjacketed Two-Piece Pressure Reactor, 150 mm Flange, 5000 mL

The following ACE heavy wall borosilicate glass Pressure Reactors have been designed and tested to provide the chemist with a system to perform low to moderate positive pressure reactions, synthesis, and catalysis; or simply to run reactions under inert gas conditions. Reactor capacity is 5000 mL and uses Ace-Threds to achieve a leak-tight system.

The reactor is the two-piece System, with a maximum pressure limit of 35 psig at 100°C. The Two-Piece System consists of a flanged flask and head with a shallow O-Ring groove, O-Ring, and quick-release clamp. Flange size is 150 mm inside diameter, allowing the use of large agitators and facilitating product removal and clean-out.

Features:

• Unjacketed
• All inert materials
• Reactions at ambient or pressure conditions
• Filtering by vacuum and/or pressure
• Removable/changeable filters - screen or glass, wide choice of porosities
• Mechanical agitation
• Bottom drain valve
• Easy assembly/disassembly for cleaning

The reactor consists of:

• #15 PTFE Plug ("Complete" contains THREE) - 5846-48
• West Condenser with Ace-Threds - 6024-20
• Flask, 5000 mL, 150 mm flange top with bottom outlet - 6425-23
• Head, 150 mm, #15 center neck, three side necks - 6433-44
• Pressure Reactor Manifold, complete - 6448-54
• Thermowell - 6471-24
• Clamp, 150 mm, "Quick Release" - 6517-27
• Addition Funnel, 500 mL - 7299-34
• #15 PTFE Bushing ("Complete" contains TWO) - 7506-27
• Bearing, complete, with Ace-Threds - 8044-24
• Stir Shaft, 10 mm - 8075-14
• Flexible Shaft, complete, 91.4 cm - 8081-30
• Stirrer Blade, PTFE, 24 mm wide - 8082-06
• Krytox® High Vacuum Grease - 8116-10
• Flex-Grip Chuck - 8124-10
• Bushing, PTFE, #15 with O-Ring - 8648-19
• Aluminum Heating Mantle - 12058-55
• Type "J" Thermocouple Sensor, PTFE-clad - 12110-25
• Digital Temperature Controller, "J" output - 12111-15
• Polypropylene Tubing, 1/4" OD x 0.170" ID - 12681-10
• Stirrer Motor Controller, Solid State - 13530-10
• Stirrer Motor with Mounting Rod, Solid State - 13649-09
• PTFE Sealing Tape, 1/2" Width - 14120-18

Does NOT include stand, base or clamps.