Ace Glass 12125-18 Temperature Controller Economy Type K -50 to 1200 Degrees C

Economy Model, compact, digital temperature controller. 16 segment ramp and soak, fuzzy logic, auto tune PID controller. One sensor input. One 120V output. Temperature range varies by thermocouple type. Control accuracy plus-minus 0.1 Degree C. Absolute accuracy of plus-minus 0.25 Degrees C of full range. Microprocessor based 1/32 DIN model for digital accuracy and reliability, Bright LED display.

Features:

• Bar mountable or benchtop operation
• Single loop type, downsized and lightweight
• Temperature range: -50 to 800°C, adjustable
• 0.1°C or 0.1°F temperature resolution, selectable
• Absolute accuracy: ±0.25% of range, max. ±2°C
• Control accuracy: ±0.1°C typical
• Microprocessor-based 1/32 DIN model for digital accuracy and reliability
• Dual four-digit LED display for instant recognition of process temperature and setpoint 1 value
• Auto tune PID control can maintain ±0.1° under normal conditions
• Ramp and soak, field selectable, 16 segment with hold or shut-off
• Field selectable output % power limit when heating smaller vessels or when using very low setpoints. See OEM manual (SIOH) secure menu, affects all heaters
• Output circuitry utilizes zero crossing fired solid state relay proportional control that provides interference free power (RFI) to electrical heater type resistive loads
• Rear heater outlet provides time proportional control, meaning overshoot is minimized. Percent output decreases as set temperature is approached
• Input power: 120 volts, 50/60 Hz, 15 amps maximum
• Unit measures: 2" high x 5-1/4" wide x 5-1/4" deep; weight: 2lbs, 2oz
• Operating instruction label on top for quick reference