Accuform MLAD509GP Safety Sign: No Exit

This no exit safety sign is available in a number of materials including glow in the dark.

Identify doors that are or are not emergency exits

Refrain from causing confusion by properly labeling access points

Glow material helps improve safety during power loss

 

The specific passage from the NFPA 101 Life Safety Code:
7.10.8.3 No Exit.
7.10.8.3.1 Any door, passage, or stairway that is neither an exit nor a way of exit access and that is located or arranged so that it is likely to be mistaken for an exit shall be identified by a sign that reads as follows:
NO
EXIT
7.10.8.3.2 The NO EXIT sign shall have the word NO in letters 2 in. (51 mm) high, with a stroke width of 3/8 in. (9.5 mm), and the word EXIT in letters 1 in. (25 mm) high, with the word EXIT below the word NO, unless such sign is an approved existing sign.

 

Photo-luminescent film permanently bonded to semi rigid and impact resistant plastic

Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes

Polycarbonate service temperature range: -20° to 149°F

 

Material: Lumi-Glow™ Plastic

Size: 7" x 10"

Weight: 0.13 lbs