Rotary evaporator
Operating ambient temperature range	5~35°C / 41°F ~ 95°F
Speed range	5~315 rpm
Evaporation capacity	Up to 23 ml/min
Pressure setting range	0-1013 hPa
RPM display	Digital display / Control knob
Rotation mode	Forward / Reverse / Auto inversion
Spring-loaded jack	Manual balance (maximum height 200 mm, stepless regulation, one-touch lock)
Vacuum controller	VR102S, installed above jack handle with attachment bracket
Vacuum control solenoid valve	OVR10, installed in the rear of stand base
Configuration	Rotary motor DC brushless (simple servo)
Condenser retention	Condenser bracket
Rotary evaporator	DC motor: Motor overload protection, overvoltage, low voltage, rotation speed sensor error AC adapter: Short circuit in internal circuit, overcurrent protection, overvoltage protection
Vacuum controller	Communication error, Pressure sensor error, Memory error, Leak error, High pressure error, Auto leak at error occurrence
Safety functions	Rotary evaporator DC motor: Motor overload protection, overvoltage, low voltage, rotation speed sensor error AC adapter: Short circuit in internal circuit, overcurrent protection, overvoltage protection
Cooling condenser	Double corrugated tube (cooling surface: 0.143 m2) Suction port: GL-14 (upper), 10 nozzle, 10 nozzle Cooling port: GL14 (two places in lower part), two 10 nozzles
Compatible evaporation flask	50-2000 ml. Use optional reducer to attach small flasks
Compatible receiving flask	100-2000 ml
External dimensions	W529 x D324 x H745
Overall dimensions (including bath)	554 x 365 x 745
Weight	~10.5 kg
Power rating	200-230V single phase 1A no plug, round terminal
Included accessories	Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1) Glass set: Cooling condenser (type A/B/C)(1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1), condenser bracket (1) (for type B/C), hex wrench (1) (for type B/C)

Oil Bath
Performance
Operating ambient temp. range	5~35°C
Temperature control range	Room temp. +10~180°C
Temperature control accuracy	+- 2.0°C
Configuration
Temperature control system	PID control
Controller	White LED digital display, key entry, minimum digit of 1°C
Temperature sensor	Pt100 Omega
Heater	1000W aluminum sheathed heater
Exterior	PBT (with fiber glass)
Bath reservoir	Stainless steel
Safety functions	Automatic overheat prevention, independent overheat prevention (fixed temp.), temperature upper limit error, Overcurrent protection fuse
Other functions	Overshoot alert, Auto resume (selectable), 2A service outlet, calibration offset
Standard
External dimensions	2 262 (max. D286) x H240 mm
Reservoir capacity	~5L
Power supply (fuse capacity)	200-230V, 5 6A (10 A)
Power cable	3m long, with inlet plug
Weight	~4.5 kg
Accessories	Power cable (1), Spare fuse for main power 10A (large)(1)

REV-212M-BO2A Rotary Evaporator with Vacuum Regulator, Oil Bath (5L), Glassware B, 220V by Yamato

Overview

Reviews