Seametrics FT522 FT500-Series Flowmeter Monitor

The FT522 is a flowmeter monitor with added output and alarm features. It is designed for use with Seametrics flowmeters and sensors, as well as other units which have a pulse or frequency output. It displays flow rate and total in large digits on an easily-read backlit display. Units are user selectable between gallons, cubic feet, and cubic meters. The primary output of this unit is a user-set alarm relay(alarm on relay 1 only) which signals excessive total flow within a given time period (up to 48 hours). This is typically used to detect an elevated usage level in a cooling tower or potable water application. The alarm will stay latched until Start/Stop is pressed to stop, and then pressed to clear or if the time period expires while in Automatic mode. The relay can be connected to an alarm, autodialer, or any other switch-controllable device. In addition to the usage alarm, the FT522 has analog output (4-20 mA, 0-5 Vdc or 0-10Vdc) and programmable pulse output. These can be used with an external data logger or to provide proportional chemical feed, using an externally-controlled metering pump.

Options

• 220 vac Input

For more information, please see Data Sheet and Manual