Seametrics FT440P FT400-Series Loop Powered Rate/Total Indicator Panel Mount

The FT440 flow computers are microcontroller-based indicator/transmitters that interface with pulse output flow sensors to compute and display flow rate, flow total, and also generate output signals representing flow. The FT440 has two scaled pulse outputs.

The FT440 is a "two-wire" or "loop powered" device, meaning that it is powered by the 4-20 mA loop circuit itself. An optional internal AC power supply is available for the FT440 with dual 24 and 12VDC outputs to power both the loop and sensors requiring more power than the loop can supply.

Pulse and 4-20 mA analog outputs can be used to signal external devices, e.g. certain metering pumps and water treatment controls. Alternatively, one or more pulse outputs can be configured as alarm outputs. These flow computers can be password protected to prevent resetting the total or changing configuration settings.

The FT440 indicators are available in wall and meter mount configurations. The FT440 models can also be panel mounted.

Order the FT440 only if a 4-20mA output signal is a requirement. 

Features

• Simple Setup
• Loop Powered (FT440)
• Remote or Flow Sensor Mounted
• Indicator
• Rugged Plastic Housing
• Non-volatile Memory
• Data Logging (Optional)
• Sensus Smart Output (Optional)

Options

• Tamper-evident
• Non-resettable total
• Dual Relay Output
• Display Cover
• Internal Data Logger
• Built-in 120/240 Vac/12/24 Vdc dual power supply
• Built-in 120/240 Vac/12 Vdc single power supply (FT440W for use with mechanical meters)
• Sensus Smart Output (Includes 6' Cable) 

For more information, please see Data Sheet and Manual