Seametrics MJNR-150 MJN-Series 1-1/2" NSF Bronze Body Pulse Meter w/ Reed Switch Dry Contact
- Specification
- Overview
- Accessories
- Customers Also Bought
- Your Recently Viewed Items
- Reviews


Overview
MJN-Series meters use the multi-jet principle, which has been an internationally-accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy. The Seametrics MJN-Series is certified to NSF/ANSI standard 61. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the pointers is replaced by a magnet, which is detected by an encapsulated sensor attached to the outside of the lens. Pulse rate is determined by the dial on which the magnet is placed, and by the number of sensors (single or double).
Changing the pulse rate can be done easily in the field.
The MJN-Series has a brass body and is available in 1-1/2" version.
MJNR meters use a two-wire reed switch. They provide a dry contact closure and do not require power.
Features
- Certified to NSF/ANSI standard 61
- Dry top multi-jet design
- Tolerates low quality water
- Simple pulse output
Applications
- Potable water
- Cooling tower chemical control
- Industrial water treatment
- Deduct metering
- Pump Pacing
Options
- LMI 4-pin pump connector
- Seametrics 3-pin control connector
- LMI 5-pin pump connector
Options (Pulse Rate)
- 20P = 20 Pulse/Gal (3/4" meters only, Dual Reed)
- 10P = 10 Pulse/Gal (3/4" meters only, Single Reed)
- 4P = 4 Pulse/Gal (Single Reed)
- 2P = 2 Pulse/Gal (Dual Reed)
- 1G = 1 Gal/Pulse (Single Reed)
- 5G = 5 Gal/Pulse (Dual Reed)
- 10G = 10 Gal/Pulse (Single Reed)
- 50G = 50 Gal/Pulse (Dual Reed)
- 100G = 100 Gal/Pulse (Single Reed)
- 1CF = 1 CF/Pulse (Single Reed)
- 5CF = 5 CF/Pulse (Dual Reed)
- 10CF = 10 CF/Pulse (Single Reed)
- 1CM = 1 Pulse/CM (Single Reed)
- 10CM = 10 Pulse/CM (Single Reed)
- 100CM = 100 Pulse/CM (Single Reed)
- 1L = 1 Liter/Pulse (Single Reed)
- 10L = 10 Liter/Pulse (Single Reed)
- 100L = 100 Liter/Pulse (Single Reed)
For more information, please see Data Sheet and Manual