IBI Scientific SP-3016 JVD-80 Spacer Set, 3.0 mm Thick - 16 cm Long Gels

The SP-3016 Spacer Set is designed for pouring 16 cm long polyacrylamide gels of 3.0 mm thickness. This spacer set contains three white, polystyrene spacers (2 side spacers and 1 bottom spacer) and two rubber spacer tabs, all for use in creating the gel sandwich between the glass plates of the JVD-80 Dual-Slab Vertical Electrophoresis System.

All three polystyrene spacers are of 3.0 mm thickness and must be used in conjunction with a 3.0 mm thick comb.

The two rubber spacer tabs included are to be attached at the top of the side spacers. These spacer tabs will create a flush surface for clamping the two glass plates together, considering the outside glass plate is longer than the inside (notched) glass plate.

The SP-3016 Spacer Set is not included with the purchase of a new JVD-80 Dual-Slab Vertical Electrophoresis System but can be purchased separately as an accessory item.

Features:

• Used between the 16 cm long glass plates of the JVD-80
• Must be matched with a 3.0 mm thick comb
• Includes two side spacers, one bottom spacer, and two spacer tabs