Myron L CS951-25 Conductivity/TDS Sensor for 900 Series Multi-Parameter Monitor/Controllers, 3/4" NPT, 0-20000 Microsiemens/ppm, 25' Cable

The Myron L Company CS910 and CS910LS Resistivity sensors are designed to operate in demanding environments. They are excellent sensors for a wide variety of water quality applications, but they are particularly well suited for applications where high purity water is required. Process connections are made via a 3/4" NPT fitting. This fitting may be installed into a line or tank, or may be reversed so that the sensor can be inserted into a standpipe for use in submersion applications. The standard versions have a 316 stainless steel body and fittings made from temperature-resistant and chemically non-reactive polypropylene. Optional fittings of stainless steel or PVDF (polyvinylidene difluoride) are available for even better chemical and temperature resistance. All CS910 and CS910LS sensors are completely encapsulated and feature a dual O-ring seal design that ensures long life under demanding conditions. The outer O-ring bears the brunt of environmental attacks, allowing the inner O-ring to maintain a reliable seal. The built-in PT1000 RTD makes accurate and quick temperature measurements for superior temperature compensation. Standard cable length is 10ft.(3.05m) terminated with 5, tinned leads (4 signal; 1 shield; separate 5-pin terminal block included). They are also available with optional 25ft (7.6m) or 100ft (30.48m) cables.

Advantages:

• Low Cost / High Performance
• Temperature and Chemically Resistant Construction
• Easy to Install
• Built-in Temperature Sensor

For more information, please see Data Sheet