Irrometer 200SS-SDI 3 Sensor SDI Adapter with SDI-12 Output

Irrometer 200SS-SDI 3 Sensor SDI Adapter with SDI-12 Output
Click to zoom
  • Overview
  • Customers Also Bought
  • Your Recently Viewed Items
  • Reviews
Condition: new
Warranty

Overview


Serial Data Interface at 1200 baud (SDI-12) is a standard communication protocol for integrating digital sensors with compatible data devices. The 200SS-SDI adapter has a builtin SDI-12 interface, designed to communicate with up to three 200SS-WATERMARK soil water potential sensors and one (optional) 200TS soil temperature sensor. A single or multiple 200SS-SDI adapter board with unique addresses may share a common 3-wire SDI-12 bus (power, ground, and serial data line) which enables a two-way communication between the adapter board and data logger.

The 200SS-SDI adapter allows two different measurement options to be monitored, the raw electrical resistance and the soil water potential measurements provided by the internal calibration. For an increase in accuracy of the WATERMARK's soil water potential measurements, the soil temperature sensor compensates for temperature variations within the soil profile. If the soil temperature sensor is not utilized, a default temperature of 75°F/24°C is applied.

Specifications:

  • Dimensions: 45.7mm x 30.5mm
  • Terminal Block: 2.54 mm pitch
  • SDI-12 Bus Input:
    • +12 - Power in,
    • GND - Ground Line,
    • I/O - Serial Data Line
  • Sensor Options:
    • 1 200TS Soil Temperature Sensor,
    • 3 200SS-WATERMARK

Power:

  • Input: min: 6VDC max: 40VDC
  • Power Up Time: 100ms applying +12VDC
  • Power Down: remains awake for 100ms after end of last command
  • Sleep Current Draw: 15 µA
  • Idle Current Draw: 500 µA
  • Measurement: 1.05 mA
  • Transmit: 1.25 mA

Reviews